Description
The Dynarex DynaRide S2 is a dependable, everyday manual wheelchair built on a durable steel frame with a powder-coated silver vein finish. It has an 18″ x 16″ seat with black padded vinyl upholstery, detachable padded desk-length arms for easy side transfers, swing-away footrests, 24″ rear wheels with handrims and 8″ front casters. A dual axle lets you set the seat at standard height or lower it to hemi height for users who propel with their feet. It supports up to 250 lbs.
Not every situation calls for an ultralight chair. If you need a wheelchair for recovery after surgery, for a family member who visits, or for regular use around the house, a sturdy standard chair does the job for a fraction of the price of premium models. This is the same style of chair you see in hospitals and clinics, and it is built to hold up to daily use.
Key Features
- Durable steel frame with chip-resistant silver vein finish.
- Detachable padded desk arms for side transfers and pulling up to a table.
- Swing-away footrests that move out of the way for standing and transfers.
- Dual axle for standard or hemi (lower) seat height.
- 24″ rear wheels with handrims for self-propelling.
- Folds to about 12″ wide for the car or closet.
- Limited lifetime warranty.
Built for Everyday Use
The steel frame of the Dynarex DynaRide S2 gives it a solid, stable feel. It weighs about 36 lbs. without the footrests, which is heavier than a lightweight aluminum chair, but that weight also makes it steady for transfers and long days in the chair. It folds side to side to about 12″ wide, so it fits in most car trunks.
The desk-length arms are shorter in front, so you can roll right up to a dining table or desk. They lift out completely when you need to slide sideways into a bed, car seat or recliner. The swing-away footrests turn to the side and come off so you can get your feet flat on the floor before standing up.
Standard or Hemi Height
Hemi height means a lower seat. Some people, especially after a stroke, push the wheelchair with one hand and one foot. A lower seat lets that foot reach the floor. The dual axle on this chair lets us set the seat at the standard height of about 19″ or lower it to about 17″ for hemi use. We will set it up for you before you leave the showroom.
Options
- Seat size: 18″ x 16″ (shown). 16″ x 16″ and 20″ x 16″ (300 lb. capacity) available by request.
- Arms: Detachable desk-length (shown) or full-length.
- Leg supports: Swing-away footrests (shown) or elevating leg rests.
Dynarex DynaRide S2 Specifications
| Model | Dynarex 10222 |
| Seat Size | 18″ W x 16″ D |
| Seat-to-Floor Height | About 17″ to 19″ (dual axle) |
| Weight Capacity | 250 lbs. |
| Weight Without Footrests | About 36 lbs. |
| Folded Width | About 12″ |
| Wheels | 24″ rear, 8″ front casters |
| Frame | Steel, folding |
| Upholstery | Black padded vinyl |
| Warranty | Limited lifetime |
Specifications from Dynarex Corporation.
Using the Dynarex DynaRide S2 Safely
Always lock both wheel locks before you sit down, stand up or transfer. Swing the footrests out of the way before standing, and never stand on the footplates. Take curbs and ramps slowly, and ask for help on steep slopes.
Compare Dynarex Wheelchairs
Want a simpler chair for less? See the Dynarex DynaRide S1. Need a lighter frame or elevating leg rests? Look at the DynaRide S3 Lite or the DynaRide S4 X-Lite.
Rent Before You Buy
Only need a chair for a few weeks? We also offer manual wheelchair rentals in Lexington for short-term recovery and visiting family.
Who Is the Dynarex DynaRide S2 Ideal For?
- Recovery after surgery, injury or a hospital stay
- Everyday use at home on a budget
- Users who propel with their feet and need hemi seat height
- A backup chair for a second home or for visiting family
Buy the Dynarex DynaRide S2 in Lexington, KY
Mobility Equipment of Lexington is your local source for Dynarex and other manual wheelchairs. Stop by our showroom to compare chairs side by side, and our team will set up the seat height, footrests and wheel locks so it fits you before you leave. We serve Lexington, Nicholasville, Georgetown, Winchester, Richmond and the surrounding Central Kentucky communities.
- Showroom: 2551 Regency Road, Unit 108, Lexington, KY 40503
- Hours: Monday to Friday 10am to 6pm, Saturday 10am to 2pm
- Call: 859-523-0993
Have questions? Contact us today.
Manufacturer Resources
Frequently Asked Questions
How much does the Dynarex DynaRide S2 cost?
$249.99 for the 18″ x 16″ model with desk arms and swing-away footrests.
What is the weight capacity?
250 lbs. for the 16″ and 18″ seats, and 300 lbs. for the 20″ seat.
Can I push it myself?
Yes. The 24″ rear wheels have handrims for self-propelling, and a caregiver can push using the rear handles.
Can I rent one instead?
Yes. Ask about our manual wheelchair rentals for short-term needs.
Can I try it before I buy?
Yes. Visit our Lexington showroom to try wheelchairs side by side, and we will adjust the fit for you.
